How to Guide: Wall Graphics

What you will need:

• Masking tape
• Squeegee/straight edged tool
• Tape measure
• Two people (if wall graphic is greater than 650mm x 650mm)

Step 1

Clean wall and hands and ensure they are dry before commencing application. Position wall graphic and tape corners with small pieces of masking tape.

Step 2

Check panel is straight by measuring to a known straight edge.

Step 3

Apply masking tape along the top edge of the panel.

Step 4

Gently lift the panel from the bottom up to the tape at the top. The tape will act as a hinge. Lift until you can peel the backing paper away from the sticker.

Step 5

Continue to peel the paper away from the sticker. At the same time, gently smooth the sticker onto the wall,  with the squeegee / straight edge from the top down.

Step 6

When the paper has been completely removed and the panel is on the wall, smooth over the graphic again, from top to bottom.

Step 7

Peel off the masking tape.

Step 8

The adhesive is removable and able to be repositioned. Keep the backing paper for storage of the wall graphic when not in use.